GF112B Single Phase kWh Meter Calibrator is suitable to test various types single phase kWh meters error on site - including single phase electronic meter, single phase mechanical energy meter. and also it can be used to test alternating current parameters - U, I, P, Q, S ,F, E etc.
The GF112B single phase working standard is distinguished by its exemplary combination of functionality and design. It is offering optimal ergonomics and functionality combined with an excellent menu guided operation via built-in touch-keys and a 2.8 inch TFT color touch LCD-display. Weight lightest, dimension small, measurement stability. It is one of the best single phase electricity test unit on site for testing single phase energy meter accuracy with 1P2W.
Electrical parameters | |
---|---|
Accuracy class | 0.2% |
Active power measurement accuracy | 0.2%, 0.5% |
Energy measurement accuracy | 0.2%, 0.5% |
Power supply | "AAA type, Li rechargeable battery, 1800mAh, 3.6V it can work 20 hours continuously" |
Warming-up time | <5 min |
Voltage measurement | |
U Range | 0-300V |
Accuracy | 0.2% |
Current measurement | |
I Range | 1mA-120A |
Accuracy | 0.2% |
Phase measurement | |
Range | 0.00°-359.99° |
Resolution | 0.01° |
Accuracy | 0.05° |
Frequency measurement | |
Range | 45-65Hz |
Resolution | 0.001Hz |
Accuracy | 0.005Hz |
Power Factor Measurement | |
Range | -1 ~ 0 ~ 1 |
Resolution | 0.001 |
Accuracy | 0.002 |
Energy pulse output | |
Pulse constant | 25000 |
Energy Pulse Input | |
Input range of pulse constant | 1-25000 |
Pulse input level | 5V |
Function | |
Register test | Yes |
Voltage and Current Wave | Yes |
Optical sampler | Yes |
Pulse cable | Yes |
PC management software | Yes |
LCD | 2.8 inch touch TFT color LCD |
Data storage | 1000 sets |
Communication port | USB |
Standard | |
Standard | IEC 62053-21,22, 23; IEC 60736; ANSI C12.20-2002; JJG 597-2005; JJG596-2012; JJG 1085-2013; JJF 68-2019; DL/T 826-2002; DL/T 1478-2015; DL/T 448-2016 |
Safety | |
Isolation protection | IEC 61010-1:2001 |
Measurement Category | 300 V CAT III |
Degree of protection | IP42 |
Declaration of conformity | CE & CNAS certified |
Mechanical parameters | |
Dimensions (W×D×H) (mm) | 215×60×30 Aperture of current clamp: 20mm |
Weight (kg) | 0.25 (mains) 1.5 (accessory and portable box) |
Environmental conditions | |
Working temperature | -10°C to 55°C |
Working humidity | 5%-85%RHD |
Storage temperature | -25°C to 70°C |
Storage humidity | 5%-95%RHD |