P8 Wholesale Top Quality 5A AC Current Clamp CT

clamp on current probe

The P8 current clamp ct is an affordable & durable mini current clamp ct for measurements to 10A AC. This clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift 0.2°, current range 5A/10A/20A, ratio 2500:1, 2000:1 or 1000:1, frequency range from 40Hz to 2kHz. The P8 Series AC current clamp ct is a cheap and economic current clamp probe to be used in power and low level current measurement applications. This model P8 clamp ct are strictly in conformity with EN61010-1, EN61010-2-032, EN61010-2-031, IEC60044, & IEC61869 standard etc.



  • Measurement current range of 1mA to 20A AC;
  • Small, compact size;
  • 40Hz to 2kHz response;
  • Ratio 2500:1 or 2000:1, high precision 0.2%;
  • Improved ergonomic design and easy operation;
  • High content nickel metal core;
  • Low phase shift for power measurement;
  • 1mA/A AC output signals;
  • Economic design;
  • Designed to EN 61010, 600V CAT III safety standard;
  • UL, CE CNAS mark;
  • Jaw opening accommodates conductors up to 8mm diameter;
  • Designed for DMMs, loggers, recorders and oscilloscopes;


  • Phase angle meter;
  • Power load monitoring;
  • Power quality measuring;
  • Data logging/recording;
  • Measuring around cable bundles;
  • Waveform analysis;
  • Energy meter calibrator;
  • Measuring in breaker panels;
  • HVAC;
  • Oscilloscopes;
  • Multimeter;


Electrical parameters
Ratio 2500: 1, 2000:1 or 1000:1 (customized)
Accuracy class 0.2%, 0.5%
Phase shift <10'
Primary current 0 - 10A AC
Secondary current 0 - 10mA AC (customized)
Secondary voltage 0-0.1V AC, 0-0.5V AC, 0-1V AC, 0-5V AC
Max. Cont. Input current 20A
Load capacity ≤10Ω, Standard 4Ω
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 10mA AC at nominal input current
Output signal (AC voltage) From 0 to 0.5V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 720 V
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation clamp type
Output mode lead output(2.5m)
Connector Audio connector, BNC, 4mm banana, signal cable(2 cores)
Mechanical parameters
Dimensions (L x W x H) (mm) 42× 139 × 20
Weight (g) 180
Holding wire diameter (mm) φ8
Max. jaw opening (mm) 8
Jaw color Black
Material PC+ABS+Polycarbonate, UL94 V0


Model Rate Current Max Current Secondary Current Coil Ratio Burden Resistance Accuracy
P8-5 5A 6A 2mA 2500:1 customized 0.2%
P8-10 10A 12A 4mA 2500:1 customized 0.2%
P8-20 20A 24A 8mA 2500:1 customized 0.2%
P8-5-1 5A 6A 2.5mA 2000:1 customized 0.2%
P8-10-1 10A 12A 5mA 2000:1 customized 0.2%
P8-20-1 20A 24A 10mA 2000:1 customized 0.2%
P8V1-5 5A 6A 50mV 2000:1 customized 0.2%
P8V2-10 10A 12A 100mV 2000:1 customized 0.2%
P8V3-20 20A 24A 200mV 2000:1 customized 0.2%
P8V1-5-1 5A 6A 0.5V 2000:1 customized 0.2%
P8V2-10-1 10A 12A 1V 2000:1 customized 0.2%
P8V3-20-1 20A 24A 2V 2000:1 customized 0.2%

Download Catalogue

Related Products