D50 1000A AC/DC CURRENT CLAMP

ac dc current clamp

The round jaw design on the D50 series hall effect current clamp along with the high content permalloy core makes them well suited for power quality applications where high linearity and low phase shift along with wide frequency are important from 10Hz to 200kHz. Measurement range is 0 to 500A or 0 to 1000A AC/DC. It designed for oscilloscopes, power quality analyzer, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs.

 

DESCRIPTION

The Model D50 AC/DC current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional 1V or 2V output for direct readings on oscilloscopes from DC to 1MHz at -3dB. The D50 is power by a rechargeable multimeter battery or from a 5V or 9 V DC power signal cable. It is the perfect tool for most of the waveform displaying instruments. 

Applications

  • Waveform analysis;
  • Oscilloscopes meter;
  • Power load monitoring;
  • Power quality analyzer(PQA);
  • Power and harmonic meters;
  • Energy meter calibrator;
  • Measuring around cable bundles;
  • Power meter;
  • Multimeter;
  • Battery load analysis;
  • Data logging/recording;
  • Cable fault analysis;
  • Large industrial loads;
  • Power quality monitoring;
 

Features

  • Frequency 10Hz-1MHz Bandwidth;
  • Measurement range 0-500A/0-1000 AC/DC;
  • High precision 0.2% for DC current measurement;
  • Improved ergonomic design & easy operation;
  • Frequency response from DC to 200 KHz;
  • Holding wire diameter: φ52mm;
  • Conforms to EN 61010, 600V CAT III;
  • High content permalloy core;
  • Low phase shift for power measurement;
  • Industrial design & beautiful appearance;
  • Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;
  • UL, CE CNAS mark;
 

Parameters

Electrical parameters
Ratio 1000: 1 , 2000:1 (customized)
Accuracy class 0.2%, 0.5%, 1%, 2%
Primary current 0 - 500A or 0-1000A AC/DC
Signal output 1mV/A, 10mV/A
Secondary voltage 0 - 1V or 0 - 2V AC/DC
Max. Cont. Input current 1200A AC/DC
Load capacity ≤20Ω, standard 4Ω
Over voltage category CAT III 600V
Linearity 0.1%
Frequency range 10Hz-1MHz
Frequency response time ≤10us
Phase Shift at 50/60Hz ±1°
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -40°C to +55°C
Output 2.5 meter cable with D01 or BNC connector
Max. voltage not insulated conductors 720 V
Power supply 5V or 9V DC
Standard EN 61010-1, EN 61010-2-032, EN 61010-2-031
IEC60044-1, & IEC61869-2, 600V CAT III
Installation clamp type
Range 10A, 100A, 1000A optional
Output mode lead output(2.5m)
Pollution Degree 2
Protection IP40
Connector BNC, 4mm banana, signal cable(4 cores),customized
Mechanical parameters
Dimensions (L x W x H) (mm) 105 x 218 x 30
Weight (g) 650
Holding wire diameter (mm) φ52
Max. jaw opening (mm) 52
Jaw color Red & Grey
Material PC+ABS, UL94 V0

SELECTION GUIDE

Model Rate Current Max Current Secondary Current Coil Ratio Burden Resistance Accuracy
D50V1-200 200A 240A 1V 1000:1 customized 0.2%
D50V1-500 500A 600A 1V 1000:1 customized 0.2%
D50V1-1000 1000A 1200A 1V 1000:1 customized 0.2%
D50V2-100 100A 120A 2V 2000:1 customized 0.2%
D50V2-200 200A 240A 2V 2000:1 customized 0.2%
D50V2-500 500A 600A 2V 2000:1 customized 0.2%
D50V2-1000 1000A 1200A 2V 2000:1 customized 0.2%
D50V3-1000 10/100/1000A 12/120/1200A 1V 2000:1 customized 0.2%
D50V15-100 100A 120A 1V 1000:1 customized 0.5%
D50V15-200 200A 240A 1V 1000:1 customized 0.5%
D50V15-500 500A 600A 1V 1000:1 customized 0.5%
D50V15-1000 1000A 1200A 1V 1000:1 customized 0.5%
D50V25-100 100A 120A 2V 2000:1 customized 0.5%
D50V25-200 200A 240A 2V 2000:1 customized 0.5%
D50V25-500 500A 600A 2V 2000:1 customized 0.5%
D50V25-1000 1000A 1200A 2V 2000:1 customized 0.5%
D50V35-1000 10/100/1000A 12/120/1200A 1V 1000:1 customized 0.5%
D50V11-100 100A 120A 1V 1000:1 customized 1%
D50V11-200 200A 240A 1V 1000:1 customized 1%
D50V11-500 500A 600A 1V 1000:1 customized 1%
D50V11-1000 1000A 1200A 1V 1000:1 customized 1%
D50V21-100 100A 120A 2V 2000:1 customized 1%
D50V21-200 200A 240A 2V 2000:1 customized 1%
D50V21-200 500A 600A 2V 2000:1 customized 1%
D50V21-1000 1000A 1200A 2V 2000:1 customized 1%
D50V31-1000 10/100/1000A 12/120/1200A 1V 1000:1 customized 1%

Download Catalogue

Related Products